Sennheiser e835 vs e935 – Check Which One Is Best & Why?

Sennheiser e935 & Sennheiser e835 share many similarities, but there are also important differences, such as quality, performance, features, design, and connectivity. If you want the best one between them, I Would recommend the Sennheiser e935 rather than the Sennheiser e835.

Table Of Contents hide
1 Why Do I Recommend The Sennheiser e935?
2 Side-by-Side Comparison
3 What Common Both Can Do?
4 Common Features

Why Do I Recommend The Sennheiser e935?

  • The Sennheiser e935 has an extended 40–18,000 Hz frequency response for clearer vocal detail and improved articulation at the top end during live performances, while the Sennheiser e835 uses a 40–16,000 Hz frequency response.
  • Sennheiser e935 features a more refined capsule tuning for smoother presence and natural vocal clarity that reduces harshness on loud stages, whereas the Sennheiser e835 uses a more basic vocal tuning.
  • It includes improved off-axis response control for cleaner rejection of unwanted stage noise and instruments from the sides, while the Sennheiser e835 has less consistent off-axis coloration.
  • The Sennheiser e935 comes with enhanced gain-before-feedback behavior to allow higher monitor levels without squealing in live stage environments, whereas the Sennheiser e835 reaches feedback at lower gain levels.
  • Sennheiser e935 features superior internal shock isolation for reduced handling noise when the microphone is moved or adjusted during performances, while the Sennheiser e835 uses a simpler internal isolation system.
  • It has a tighter proximity effect response for controlled low-frequency buildup when singing close to the grille, while the Sennheiser e835 produces stronger bass boost at close distances.
  • The Sennheiser e935 includes a higher-output neodymium magnet design for stronger signal levels and cleaner mixer gain staging, whereas the Sennheiser e835 uses a standard dynamic magnet structure.
  • Sennheiser e935 comes with a more robust grille and body assembly for improved durability under heavy touring and professional stage use, while the Sennheiser e835 has a simpler construction intended for general-purpose use.

Maybe the Sennheiser e835 can make you comfortable because it’s a little bit cheaper than the Sennheiser e935. But you have to compromise all the above-mentioned features. Now the Decision is Yours. I hope it was helpful to choose the right one.

Check Sennheiser e935 Best Price

Check Sennheiser e835 Best Price

Side-by-Side Comparison

FeatureSennheiser e935Sennheiser e835
Audio frequency response40–18,000 Hz40–16,000 Hz
Sensitivity (free field, 1 kHz)2.8 mV/Pa2.7 mV/Pa
Magnet system noteNeodymium ferrous magnet with boronNot specified
“Falcon ring”YesNot specified
Output statementHigh outputNot specified
Designation textVocal stage microphoneLead vocal stage microphone
Use-case noteRental companiesNot specified
Product variantsSingle modele 835 / e 835-S / e 835-S-PTT
PriceCheck Sennheiser e935 PriceCheck Sennheiser e835 Price

What Common Both Can Do?

  • Microphone type: Both microphones use a dynamic capsule design, which is well suited for live vocals. Dynamic microphones are durable and handle loud sound sources reliably.
  • Primary application: Each model is designed specifically for vocal use rather than instruments. This ensures vocal-focused tuning and intelligibility on stage.
  • Polar pattern: Both microphones use a cardioid pickup pattern. This pattern reduces sound pickup from the rear, helping control stage bleed and feedback.
  • Intended use: Both are engineered for live stage performance. Their designs prioritize durability, consistency, and predictable sound in live environments.
  • Transducer principle: Each microphone operates using a moving-coil transducer. This makes them less sensitive to moisture and rough handling compared to condenser microphones.
  • Wired operation: Both microphones are fully wired designs. This ensures stable signal transmission without reliance on batteries or wireless systems.
  • XLR connection: Each model uses a standard 3-pin XLR output. This allows compatibility with mixers, audio interfaces, and stage snakes.
  • Phantom power required: Neither microphone requires phantom power. This simplifies setup and avoids compatibility issues with basic mixers.
  • Metal housing: Both microphones feature a metal body construction. This improves durability for touring and frequent stage use.
  • Internal hum compensation: Each microphone includes internal hum-bucking or compensation features. This reduces interference from electrical sources such as lighting or power cables.
  • Shock-resistant design: Both models are built to withstand drops and physical stress. This is important for handheld stage microphones.
  • Handheld form factor: Each microphone is designed for handheld use. This makes them suitable for singers, presenters, and live performers.
  • Made for high SPL: Both microphones can handle high sound pressure levels. This allows close-mic singing without distortion.
  • Microphone grille: Each uses a steel mesh grille. This protects the capsule while allowing consistent acoustic performance.
  • Brand series family: Both belong to the Sennheiser Evolution microphone family. This means shared design philosophy, accessories, and stage reliability standards.
  • Stage feedback control: The cardioid design in both models helps manage feedback. This is especially useful in monitor-heavy live setups.
  • Touring suitability: Both microphones are suitable for touring use. Their construction and performance are designed for repeated transport and frequent live shows.

Check Sennheiser e935 Best Price

Check Sennheiser e835 Best Price

Common Features

FeatureSennheiser e935Sennheiser e835
Microphone typeDynamicDynamic
Primary applicationVocal microphoneVocal microphone
Polar patternCardioidCardioid
Intended useLive stage performanceLive stage performance
Transducer principleMoving-coilMoving-coil
Wired operationYesYes
XLR connection3-pin XLR3-pin XLR
Phantom power requiredNoNo
Metal housingYesYes
Internal hum compensationYesYes
Shock-resistant designYesYes
Handheld form factorYesYes
Made for high SPLYesYes
Microphone grilleSteel meshSteel mesh
Brand series familySennheiser EvolutionSennheiser Evolution
Stage feedback controlCardioid patternCardioid pattern
Touring suitabilityYesYes
Price Check Sennheiser e935 Price
 Check Sennheiser e835 Price

FAQ

What type of microphones are the Sennheiser e935 and e835?
Both the Sennheiser e935 and Sennheiser e835 are dynamic vocal microphones designed primarily for live sound applications. Dynamic microphones are known for their durability, high SPL handling, and resistance to moisture, making them reliable for stage use.

Are the Sennheiser e935 and e835 suitable for live performances?
Yes, both microphones are specifically engineered for live stage performance. They are commonly used by singers, presenters, and performers due to their robustness and consistent sound output in demanding environments.

Do the Sennheiser e935 and e835 require phantom power?
No, neither microphone requires phantom power to operate. This allows them to be used with a wide range of mixers and audio equipment without additional power requirements.

What pickup pattern do the Sennheiser e935 and e835 use?
Both microphones use a cardioid pickup pattern. This pattern focuses sound capture from the front while reducing pickup from the sides and rear, helping to control feedback and stage noise.

Can the Sennheiser e935 and e835 handle loud vocals?
Yes, both microphones are designed to handle high sound pressure levels. This makes them suitable for powerful vocals and close-mic techniques without distortion.

Are the Sennheiser e935 and e835 wired microphones?
Yes, both models are wired microphones. They use a physical cable connection rather than wireless transmission, ensuring stable and interference-free signal delivery.

What type of connector do the Sennheiser e935 and e835 use?
Both microphones use a standard 3-pin XLR connector. This ensures compatibility with professional audio mixers, stage boxes, and audio interfaces.

Are the microphone bodies made of metal?
Yes, both the Sennheiser e935 and e835 feature metal housings. This construction improves durability and makes them suitable for frequent handling and touring use.

Do the Sennheiser e935 and e835 reduce handling noise?
Yes, both microphones include internal shock and hum compensation features. These designs help reduce handling noise and electrical interference during live use.

Are these microphones handheld or stand-mounted only?
Both microphones are designed primarily for handheld use but can also be mounted on standard microphone stands. This flexibility suits a wide range of stage and presentation scenarios.

Do the Sennheiser e935 and e835 work well with stage monitors?
Yes, both microphones are well suited for use with stage monitors. Their cardioid patterns help manage feedback when monitor speakers are placed in front of the performer.

Are the Sennheiser e935 and e835 part of the same product family?
Yes, both microphones belong to the Sennheiser Evolution series. This series is known for consistent build quality, stage reliability, and professional live sound performance.

Can these microphones be used for speech and presentations?
Yes, both models are suitable for speech and spoken-word applications. Their vocal-focused tuning ensures clarity and intelligibility for presenters and public speakers.

Are the grilles on the Sennheiser e935 and e835 durable?
Yes, both microphones use steel mesh grilles. These grilles protect the internal capsule from physical damage while maintaining consistent acoustic performance.

Are the Sennheiser e935 and e835 suitable for touring musicians?
Yes, both microphones are commonly used by touring musicians. Their rugged construction, reliable sound performance, and standard connectivity make them dependable choices for frequent travel and live shows.